Monday, April 5, 2010

Nissan Land Glider Concept, 2009

Nissan Land Glider Concept, 2009






The Nissan Land Glider concept, planners and designers of Nissan have conceived a totally new form of personal zero emission mobility that combines clever, new driving experiences, all in the one compact, 4-wheeled package.

With more than 50% of the world's population living in big cities in the near future, designers latched onto motorcycles as a credible base to start the design process.

While the agility, thrills and freedom of bikes inspired the designers and engineers, an extra spice was added to the mix. Tandem architecture became the obvious choice. A unique two-seater, cocoon-like structure sitting on a zero emission powertrain. With four-wheel stability and a sense of safety that originates from a tilting cabin, the Nissan Land Glider Concept will appeal to both two- and four-wheel driving enthusiasts.

Targeted at city dwellers of all generations, the Nissan Land Glider Concept is a serious motoring statement of the new era of mobility that Nissan intends to lead.

Cocoon in the shell
The exterior incorporates a soft, sleek-looking body that appears to be protected by a special armor, The four-wheeler boasts a dynamic body design that almost seems alive. As part of Nissan's expanding zero emission family, the Nissan Land Glider Concept exudes a clean, friendly attitude.

The vehicle's two-seater tandem layout is enveloped in what seems like the canopy of a glider, while its unique `tilt' setup employs a special leaning function that holds occupants firmly in place even when the vehicle is cornering at angles. In developing the Land Glider, Nissan designers have created a two-seater that offers the sense of security of a cocoon, but delivers real driving pleasure.

Corner and lean
Described as a `personal city commuter,' the Nissan Land Glider Concept features steering-by-wire and a lean capability when cornering ? like a motorcycle ? that enables the vehicle and its tires to lean by up to 17 degrees. Able to turn sharply at nearly any speed, the Nissan Land Glider employs sensors for vehicle speed, steering angle and yaw rate to instantly calculate the level of lean required to negotiate a corner. All the driver must do is turn and the cabin will lean accordingly. By enabling the car to lean, designers have succeeded in minimizing vehicle width and tire tread width, thus achieving a sleek, futuristic look.

Driven by rear electric motors
Two electric motors in the rear powered by lithium-ion batteries mounted beneath the floor, the zero-emissions Nissan Land Glider Concept is quick off the mark. The car also features a non-contact charging system that can be charged whilst shopping at a supermarket or stopping at a motorway service station. This system enables vehicles to be charged cable-less at locations where the infrastructure exists.

Collision Avoidance
To ensure maximum safety whilst driving, engineers have fitted a car-robotics style crash avoidance system in which sensors mounted in the body detect other vehicles in the same way as fish swim in schools without colliding. This system directs the vehicle's path away from any obstacles.

Technical Specifications
  • Overall Length: 3,100 mm
  • Overall Width: 1,100 mm
  • Overall Height: 1,415 mm
  • Wheelbase: 2,180 mm
  • Seating Capacity: 2

Nissan 370Z, 2009

Nissan 370Z, 2009






The new Nissan 370Z sports a shorter wheelbase, greater use of lightweight body materials, new engine with more horsepower and a new 7-speed automatic transmission with paddle shifters, as well as the world's first synchronized down/up shift rev control system for the manual transmission.
The full measure of the new model, designated the Nissan 370Z, one need look no farther than the subtle upswept line of the new rear quarter window. Quintessentially Z, the window is reminiscent of the original 1970 Nissan 240Z - a car that revolutionised the sports car world with its unique combination of performance, style and, especially, value. The new Nissan 370Z continues this philosophy, offering accessible performance, true sportscar handling and athletic, agile design.

The New Exterior:
More athletic, more muscular, 100% Z.
The 2009 370Z's dynamic new styling offers dual benefits - a more aggressive appearance and a lighter, tighter structure for enhanced performance. The new Z's wheelbase is nearly 100mm shorter than the previous generation Nissan 350Z (2550mm versus 2650mm), accomplished by moving the rear wheels forward in the 2nd generation FM platform, while overall length is reduced by 70mm (4250mm versus 4320mm). At the same time, the overall width been increased by 33mm and the rear track by 55mm.

The more compact exterior dimensions and expanded use of lightweight materials help reduce weight, while at the same time the body structure has been extensively reinforced, improving rigidity.
Along with its new structure and stance, the Nissan 370Z has a taut new skin - one that looks completely new, yet completely Z. The exterior design incorporates intentional 240Z styling cues, a sleek aerodynamic shape, a "dynamic motion" feel with a dramatic cantilevered roof (with Nissan GT-R styling cues) and a "low visual gravity."

The 370Z's sleek silhouette is defined by its upswept quarter window design that is echoed by the dynamic upward curvature in the lower rocker panel and the sense of the taut sheet metal molding itself around the wheels and frame. Attention to detail and functionality is evident throughout the exterior design, including the addition of a turn indicator integrated into the Z logo mounted between the front wheel and door.

The Nissan 370Z Interior:
putting the driver at the heart of the action
The interior design of the new Nissan 370Z continues the Z tradition of enhancing driving pleasure, no matter what the road or traffic conditions offer. Additionally, particular attention has been paid to the quality of the material, as well as the fit and finish.
The traditional 2-seat layout is built around a deeply scooped instrument panel with a full-length centre console separating the driver and passenger's seat. In the rear is an open luggage area with enhanced storage and accessibility.
The information layer provides enhanced visibility with easy access to all key data. The gauges are once again attached to the steering column, so the driver doesn't have to choose between the perfect steering wheel position and visibility of the gauges.

The Interior packaging is also enhanced from the previous generation, including the removal of the rear strut brace (replaced with less intrusive structural reinforcements) and by adding a new "shelf" area behind the seats, creating an ideal area for storing briefcases. A retractable cover is standard on the 370Z and locking glove compartment has been added.
Life on board has been improved thanks to the addition of an engine start and stop button, larger diameter dials and thanks to the use of premium-feel material on seats, armrest and door trims (depending on grade).

3.7-litre engine: the Z's heart and soul
As its new moniker suggests, the new Nissan 370Z is now powered by a 3.7-litre VQ37VHR engine with VVEL (Variable Valve Event and Lift). Along with its larger displacement, the new engine gives better power delivery all the way to the 7,000 rpm redline, improved low-end power and more high-end torque, creating an entirely new driving experience. Approximately 35 percent of the engine's parts are new, versus the previous design. Power is rated at 331PS, while torque is 366Nm. Engine output, figures for Europe are subject to homologation.

Nissan Nuvu Concept, 2008

Nissan Nuvu Concept, 2008






The Nissan Nuvu is a concept vehicle with unique 2+1 seating. It is easy to drive, even easier to park. It is the key solutions for tomorrow's city car."
The Nissan Nuvu is described as a moving oasis, a haven of green tranquillity in the urban jungle. To underline this message, Nissan Nuvu incorporates a witty representation of its green credentials: across its all-glass roof are a dozen or so small solar panels. Shaped like leaves on a branch, the power they generate is fed to the battery using a 'tree trunk' within the car as a conduit. Nissan Nuvu also uses natural, organic and recycled materials within the cabin.

The interior package
The dimensions provide all the interior room needed for the vast majority of city journeys. Nissan Nuvu has two regular seats and a third occasional chair that can be folded down when required. But, unlike some two-seater city cars currently on the market, it is a thoroughly practical proposition with an integral luggage area providing sufficient space for a typical supermarket or shopping expedition.

The packaging is designed to give priority to driver comfort with C-segment levels of space and the flexibility to invite one or two passengers on board. Cabin layout places the regular passenger seat beside but largely behind the driver's seat, allowing the passenger to stretch right out. Ahead of this seat is a third occasional chair which, when not in use, is folded away into the dashboard assembly.

The Natural materials
Many of the materials used inside Nissan Nuvu reflect an increasing concern for the environment. The floor is made from wood fibres pressed into laminate sheets and is studded with rubber inserts made from recycled tyres for grip.
To create a light and bright interior, the windscreen and roof merge into one extended panel running virtually the entire length of the car. But undoubtedly the most unusual feature of the interior is the 'energy tree' which rises from the luggage compartment floor to the roof behind the driver's seat.

The Solar panels
The energy tree is shaped like a thin trunk. As it reaches daylight it branches out under the glass roof providing occupants with protection from bright sunlight… just like a real tree. And providing a visual reminder of Nissan Nuvu's green credentials, covering the branches are dozens of small solar panels shaped like leaves.

Driver controls are as simple as possible. All the major functions - steering, braking, transmission and throttle - are 'By-Wire' while the steering is controlled by an aircraft-style steering yoke: with just one turn from lock to lock, the steering is very direct for agility and manoeuvrability in the city. Nuvu's turning circle is just 3.7 metres. Thanks to its wide track and the use of 16 inch 165/55 tyres mounted on lightweight, almost transparent, wheels, ride comfort, stability and agility is of the highest order.
There are two pedals - for stop and go - stalks for minor controls and a digital instrument panel with dials for speed, distance covered and battery range.

Rear view/parking monitor
Two screens on the dashboard display the view behind the car - there are no door mirrors to disturb the airflow, but small cameras - and double as monitors for the Around View Camera which give a bird's eye view of the car when manoeuvering or parking.
Saving energy was the guiding force behind the use of low-energy LED head and tail lamps, while Nissan Nuvu's heating and ventilation system filters and cleans the city air as it passes through the vehicle. Not only does it produce no emissions at source, but Nissan Nuvu actually helps clean up the city environment.

The exterior and interior design
Nuvu's design is further clear evidence of Nissan's continued desire to challenge convention and to explore all the possibilities that the EV could bring us. In many ways it was inspired by our two most extreme EVs of recent times: Mixim and Pivo 2.

Matching the ecological values of an electric vehicle, the moulded plastics and synthetic elements found inside a typical production car have been replaced by natural materials and organic alternatives, such as the wood fibres and rubber from car tyres used for the flooring. The result helps create a relaxed, warm atmosphere within Nuvu's cabin.

EV drivetrain
Nissan Nuvu is more than a styling concept of a future EV. It is a fully working mobile test bed for much of the technology that will be used in Nissan's production EV to be launched in 2010. For this reason elements of its technical specification are being kept secret for the time being.
The electric motor used in Nissan Nuvu is mounted at the rear of the vehicle and drives the back wheels, though neither its exact specification nor the power and torque figures are being released at this stage. A driving range of 125 kms and top speed of 120 km/h are being made public, however.

Li-Ion battery
Similarly although it can be revealed that the batteries used are of the latest laminated lithium-ion type and have a capacity of 140 Wh/kg (watt-hours per kilogram), the total capacity of the batteries and number of modules are not being disclosed at this stage.

Unlike a conventional lithium-ion battery with its bulky cylindrical cells, the laminated Li-Ion battery as used in Nissan Nuvu has thin laminated cells and fewer components overall. This boosts its power by a factor of 1.5 at the same time as halving its physical size. It also remains twice as efficient as a conventional cylindrical Li-Ion battery even after five years or 100,000 kms of continuous usage.
Its compact size allows the batteries to be mounted under the seats and the vehicle's flat floor, thus helping to keep the centre of gravity as low as possible.
A quick charge from empty to full should take between 10 to 20 minutes while a full charge should take between three to four hours from a domestic 220V socket.

Noble M14, 2004

Noble M14, 2004





Having conquered the specialist sports car market over the last five years, Noble Automotive is now launching an all-new model, which will firmly establish it at the quality end of the supercar market.
The British Noble M14 is set to take on rivals, such as the Porsche 911 Turbo and Ferrari 360 Modena, with a tantalising mix of class-leading dynamics, prodigious performance, a finely crafted and well equipped cabin, and levels of practicality that will appeal to owners who wish to use their car every day.

Exterior Design
The 2004 British Motor Show will see the Noble M14 unveiled for the first time. Far from being a mere concept, the show car's styling, interior, drivetrain and chassis represent what will reach production when the car goes on sale in October this year.

This fact is obvious when you look more closely at the car: beautifully engineered door handles, hewn from billets of aluminium; six circular rear light lenses, which make reference to legendary supercars from the past; the rear screen, which reveals the engine's plenum chamber protruding above the perforated aluminium engine cover; and the body-coloured rear diffuser, which cuts deep into the rear panel, highlighting the twin exhausts which exit from its centre. Overall, 95 per cent of the components which make up the M14 (excluding the drivetrain) are distinct from the current M12 series of cars, and an additional 70 per cent of components are now made in house, compared with previous Noble models.

While the M14 retains the current M12's wheelbase, its length has grown by 178mm to 4267mm and its width by 50mm to 1935mm. As a result, more space has been liberated in the cabin, compared with the M12, and there are now two luggage compartments, one behind the engine, and one at the front of the car. This increase in size has also helped Noble incorporate significant crash protection in the doors, and deformable sections at the front and rear of the M14, with a view to it achieving full European Type Approval in the future.

Drivetrain & Performance
Noble has chosen again to adopt a highly-modified version of Ford's 3.0-litre V6, mated to a six-speed manual gearbox, for use in the M14. The unit, which in base form also powers certain Jaguar cars, has proved particularly durable in five years of Noble M12 development and production.

Like the GTO-3R and M400 models, the engine employs twin turbochargers, but uses an engine map developed specifically for the M14. In common with the 425bhp M400 model, the M14 will gain forged pistons to ensure durability. Maximum power will be 400bhp at 6100rpm, with a wholesome 385lb ft of torque at 4750rpm. Estimated performance will be 0-60mph in 4.3 seconds, 0-100mph in 9.5 seconds and a top speed of 190mph.

Twin intercoolers now feature in the M14, and are mounted behind each rear wheel arch. This location has two clear advantages: it creates vital space at the back of the car for a luggage compartment; and cooler air can now be ducted over each internal wheel arch cover, rather than above the engine, improving the efficiency of the intercoolers.

The ratios in the M14's six-speed gearbox have been designed to specifically match its power and torque characteristics, complementing the engine's linear delivery. In top gear the M14 pulls 26.5mph per 1000rpm, giving it a remarkably relaxed cruising gate, with 70mph registering just over 2600rpm. This gearbox, which is mated to an automatic torque-biasing differential, has received extensive development in Noble's even more powerful M400 model, and has proved exceptionally durable. A completely new gearshift mechanism, offering drivers slick, finger-light changes, completes the package.

Interior & Packaging
Trimmed in the finest Italian leather (Noble uses the same supplier as Ferrari for the M14) there is no mistaking the M14 cabin's aura of quality and luxury. The padded leather extends throughout the cabin, and is complimented by grey Alcantara roof lining and a gear tunnel and centre console formed in a gunmetal-coloured composite material. The floor and some lower sections of the cabin are trimmed in deep, 80 per cent wool carpet. There are even leather sill pads, incorporating the 'Noble' logo, for drivers to lean against while exiting the car.

The stunning and sumptuous seats, which will be standard in all M14s are manufactured specifically for Noble. They feature a carbon fibre frame, for strength and lightness, and are trimmed in the same top-grade leather seen elsewhere in the cabin. Both seats incorporate fore and aft adjustment, as well as reclining backrests and tilt adjustment.

Equipped like no other Noble, the M14 will come with the following:
  • Electric windows
  • Electric/heated door mirrors
  • Air conditioning
  • Heated windscreen with integral aerial
  • Satellite Navigation (option)
  • Multi-function dashboard display
  • Central locking
  • Alarm/immobiliser
Noble's key objective when designing the control layout of the M14, was to allow the driver to focus on the road ahead, and not on a plethora of switches outside of his/her peripheral vision. For this reason, the most frequently used functions are performed by a bank of six buttons located on the steering wheel boss. From here, the driver can operate the hazard warning lights, heated windscreen/mirrors and multi-function display housed in the instrument cluster (which in turn gives data on water temperature, turbo boost, oil pressure and trip mileage). The remaining buttons control the front and rear boot, and fuel-filler cap releases.

As a result, the main dashboard and console area is clutter free. A distinctive cylindrical air vent sprouts from each corner of the dashboard, in addition to secondary face vents mounted on the centre console. Above these are the three air conditioning controls and a CD-tuner, which can also incorporate satellite navigation as a cost option. Two column stalks take care of windscreen wiper/washer and indicator functions.

A total of seven, trimmed storage areas are spread around the M14's cabin, reinforcing the car's remit as a practical, everyday device. There are two leather-covered bins located on the inside of each sill (rather than on the doors, where belongings are prone to rattle more) a deep open shelf in front of the passenger and driver, and a central cubby behind the handbrake lever.

Chassis & Construction
The M14's chassis has been adapted from that used on the highly praised Noble M12. Despite the change in design emphasis with the M14, it was felt that the inherent suppleness in the M12's ride, combined with its class leading levels of grip and composure, would lend itself perfectly to the new car's design philosophy. Consequently, the existing chassis has been refined - rather than significantly changed - to suit the M14.

All M14 bodies will be made from vinylester GRP composite (Noble may also consider carbon fibre in future), built over a steel spaceframe, which is reinforced with bonded and riveted alloy panels. A full roll over cage extends around the inside of the M14's cabin, adding strength to what will be our stiffest production structure to date.

Suspension is by double wishbones all round, with coil springs and alloy uprights. Rack and pinion steering, with hydraulic power assistance is geared to 2.5 turns from lock to lock, offering a far tighter turning circle than the current M12.

Related Posts Plugin for WordPress, Blogger...